@prefix prodottidellaricerca: . @prefix istituto: . @prefix prodotto: . istituto:CDS073 prodottidellaricerca:prodotto prodotto:ID43352 . @prefix pubblicazioni: . @prefix unitaDiPersonaleInterno: . unitaDiPersonaleInterno:MATRICOLA2925 pubblicazioni:autoreCNRDi prodotto:ID43352 . unitaDiPersonaleInterno:MATRICOLA6720 pubblicazioni:autoreCNRDi prodotto:ID43352 . @prefix unitaDiPersonaleEsterno: . unitaDiPersonaleEsterno:ID384 pubblicazioni:autoreCNRDi prodotto:ID43352 . unitaDiPersonaleEsterno:ID382 pubblicazioni:autoreCNRDi prodotto:ID43352 . @prefix modulo: . modulo:ID2440 prodottidellaricerca:prodotto prodotto:ID43352 . @prefix rdf: . @prefix retescientifica: . prodotto:ID43352 rdf:type retescientifica:ProdottoDellaRicerca , prodotto:TIPO1101 . @prefix rdfs: . prodotto:ID43352 rdfs:label "Comparison of ZrB2-ZrC-SiC composites fabricated by spark plasma sintering and hot-pressing (Articolo in rivista)"@en . @prefix xsd: . prodotto:ID43352 pubblicazioni:anno "2005-01-01T00:00:00+01:00"^^xsd:gYear ; pubblicazioni:doi "10.1002/adem.200400184"^^xsd:string . @prefix skos: . prodotto:ID43352 skos:altLabel "
Valentina Medri; Frederic Monteverde; Andrea Balbo; Alida Bellosi (2005)
Comparison of ZrB2-ZrC-SiC composites fabricated by spark plasma sintering and hot-pressing
in Advanced engineering materials (Print)
"^^rdf:HTML ; pubblicazioni:autori "Valentina Medri; Frederic Monteverde; Andrea Balbo; Alida Bellosi"^^xsd:string ; pubblicazioni:paginaInizio "159"^^xsd:string ; pubblicazioni:paginaFine "163"^^xsd:string ; pubblicazioni:numeroVolume "7"^^xsd:string . @prefix ns12: . prodotto:ID43352 pubblicazioni:rivista ns12:ID162577 ; pubblicazioni:numeroFascicolo "3"^^xsd:string ; skos:note "ISI Web of Science (WOS)"^^xsd:string ; pubblicazioni:affiliazioni "National Research Council- Insitute of Science and Technology for Ceramics \nVia Granarolo 64, I-48018, Faenza, Italy"^^xsd:string ; pubblicazioni:titolo "Comparison of ZrB2-ZrC-SiC composites fabricated by spark plasma sintering and hot-pressing"^^xsd:string ; prodottidellaricerca:abstract "Ultra-high-temperature-ceramic (UHTC) composites with the starting composition (vol. %) ZrB2+30ZrC+10SiC were fabricated by spark plasma sintering (SPS) and by hot pressing (HP). A fully dense material was produced by SPS, heating up to 2100\u00B0C in about 20 minutes and 30 MPa of applied pressure. In the HP case (1870\u00B0C for 40 minutes and 30 MPa of applied pressure), the incorporation of a sintering aid like silicon nitride was useful for reaching near full density. The total processing time was drastically lower, about one order of magnitude, for the SPS procedure compared to that necessary for HP.\nThe microstructure of both the composites was uniform and similar in grain size (< 3 mm) and shape. However, the phase chemistry and distribution changed little: secondary phases like zirconia and other Si-containing compounds were revealed only in the HP composite. A comparison of the SPS and HP techniques applied to ultra-refractory ceramics showed the former to be a rapid fabrication process leading to a refined microstructure depleted of secondary phase."@en ; prodottidellaricerca:prodottoDi modulo:ID2440 , istituto:CDS073 ; pubblicazioni:autoreCNR unitaDiPersonaleInterno:MATRICOLA6720 , unitaDiPersonaleEsterno:ID384 , unitaDiPersonaleEsterno:ID382 , unitaDiPersonaleInterno:MATRICOLA2925 . ns12:ID162577 pubblicazioni:rivistaDi prodotto:ID43352 .