@prefix prodottidellaricerca: . @prefix istituto: . @prefix prodotto: . istituto:CDS070 prodottidellaricerca:prodotto prodotto:ID286939 . @prefix pubblicazioni: . @prefix unitaDiPersonaleInterno: . unitaDiPersonaleInterno:MATRICOLA5587 pubblicazioni:autoreCNRDi prodotto:ID286939 . @prefix modulo: . modulo:ID2184 prodottidellaricerca:prodotto prodotto:ID286939 . @prefix rdf: . @prefix retescientifica: . prodotto:ID286939 rdf:type retescientifica:ProdottoDellaRicerca , prodotto:TIPO1101 . @prefix rdfs: . prodotto:ID286939 rdfs:label "Optimization of Design Parameters of a Stirling Generator for use with a Fluidized Bed Combustor (Articolo in rivista)"@en . @prefix xsd: . prodotto:ID286939 pubblicazioni:anno "2013-01-01T00:00:00+01:00"^^xsd:gYear ; pubblicazioni:doi "10.5541/ijot.472"^^xsd:string . @prefix skos: . prodotto:ID286939 skos:altLabel "
Lombardi, Simone; Bizo?, Katarzyna; Marra, Francesco Saverio; Continillo, Gaetano (2013)
Optimization of Design Parameters of a Stirling Generator for use with a Fluidized Bed Combustor
in International journal of applied thermodynamics
"^^rdf:HTML ; pubblicazioni:autori "Lombardi, Simone; Bizo?, Katarzyna; Marra, Francesco Saverio; Continillo, Gaetano"^^xsd:string ; pubblicazioni:paginaInizio "155"^^xsd:string ; pubblicazioni:paginaFine "162"^^xsd:string ; pubblicazioni:url "http://www.scopus.com/record/display.url?eid=2-s2.0-84890513614&origin=inward"^^xsd:string ; pubblicazioni:numeroVolume "16"^^xsd:string . @prefix ns11: . prodotto:ID286939 pubblicazioni:rivista ns11:ID175583 ; pubblicazioni:numeroFascicolo "4"^^xsd:string ; skos:note "Scopu"^^xsd:string ; pubblicazioni:affiliazioni "Consiglio Nazionale delle Ricerche"^^xsd:string ; pubblicazioni:titolo "Optimization of Design Parameters of a Stirling Generator for use with a Fluidized Bed Combustor"^^xsd:string ; prodottidellaricerca:abstract "This work investigates the ideal performances that could be achieved in the coupling of a Fluidized Bed Combustor with a Stirling engine by placing the head of a Stirling engine, more specifically the elements of the hot side heat exchanger, in direct contact with the sand of the Fluidized Bed Combustor. This choice is primarily suggested by the heat exchange coefficients between the multiphase fluidized bed medium and the surface of the heat exchanger, much larger than those attained when the heat exchanger is located in the stream of hot flue gases. Moreover, the mechanical action exerted by the fluidized solid particles substantially reduces the fouling usually caused by impurities in exhaust gases of a biomass combustion process. A mathematical model, which covers a small size fluidized bed and the Stirling engine, is developed and used to optimize design and operating conditions with specific attention to the Stirling hot side heat exchanger. It is shown that the choice to place the heat exchanger in direct contact with the fluidized bed can lead to an improvement of performance in terms of efficiency and shaft power output, making the development of this kind of system attractive for the production of energy from renewable sources."@en ; prodottidellaricerca:prodottoDi modulo:ID2184 , istituto:CDS070 ; pubblicazioni:autoreCNR unitaDiPersonaleInterno:MATRICOLA5587 . @prefix parolechiave: . prodotto:ID286939 parolechiave:insiemeDiParoleChiave . ns11:ID175583 pubblicazioni:rivistaDi prodotto:ID286939 . parolechiave:insiemeDiParoleChiaveDi prodotto:ID286939 .