@prefix prodottidellaricerca: . @prefix istituto: . @prefix prodotto: . istituto:CDS049 prodottidellaricerca:prodotto prodotto:ID253764 . @prefix pubblicazioni: . @prefix unitaDiPersonaleInterno: . unitaDiPersonaleInterno:MATRICOLA1947 pubblicazioni:autoreCNRDi prodotto:ID253764 . @prefix rdf: . @prefix retescientifica: . prodotto:ID253764 rdf:type retescientifica:ProdottoDellaRicerca , prodotto:TIPO1301 . @prefix rdfs: . prodotto:ID253764 rdfs:label "OECD AGR/CA/T(2005)37 Safety belts on agricultural and forestry tractors (Contributo in atti di convegno)"@en . @prefix xsd: . prodotto:ID253764 pubblicazioni:anno "2003-01-01T00:00:00+01:00"^^xsd:gYear . @prefix skos: . prodotto:ID253764 skos:altLabel "
CAVALLO Eugenio; GASPARETTO Ettore, PESSINA, Domenico; RONDELLI, Valda, FABBRI, Angelo, MAROCCHI, Antonio, Bisaglia Carlo, Cutini Maurizio, Carnevali Carlo (2003)
OECD AGR/CA/T(2005)37 Safety belts on agricultural and forestry tractors
in 12TH BIENNIAL OECD TEST ENGINEERS' CONFERENCE, Madrid, 29 settembre- 3 ottobre 2003
"^^rdf:HTML ; pubblicazioni:autori "CAVALLO Eugenio; GASPARETTO Ettore, PESSINA, Domenico; RONDELLI, Valda, FABBRI, Angelo, MAROCCHI, Antonio, Bisaglia Carlo, Cutini Maurizio, Carnevali Carlo"^^xsd:string ; pubblicazioni:paginaInizio "1"^^xsd:string ; pubblicazioni:paginaFine "5"^^xsd:string ; pubblicazioni:altreInformazioni "Documento ufficiale OECD AGR/CA/T(2005)37 preparato e presentato alla conferenza da Eugenio CAVALLO in collaborazione con i delegati italiani partecipanti al 2003 OECD Test Engineer Conference come certificato da Mr. Michael Ryan, Head of the Unit OECD Code & Scheme, Trade and Agriculture Directorate, con lettera OECD prot TAD/CODES/T/131.13 del 29/08/2013 Prot. IMAMOTER 1865 del 02/09/2013"^^xsd:string ; pubblicazioni:titoloVolume "12TH BIENNIAL OECD TEST ENGINEERS' CONFERENCE"^^xsd:string ; pubblicazioni:numeroVolume "AGR/CA/T(2005)37"^^xsd:string ; pubblicazioni:volumeInCollana "AGR/CA/T(2005)37"^^xsd:string ; pubblicazioni:pagineTotali "5"^^xsd:string ; pubblicazioni:affiliazioni "Imamoter; Istituto di Ingegneria Agraria, Universit\u00E0 di Milano; DEIAGRA, Universit\u00E0 di Bologna; CRA-ING; ENAMA"^^xsd:string ; pubblicazioni:titolo "OECD AGR/CA/T(2005)37 Safety belts on agricultural and forestry tractors"^^xsd:string ; prodottidellaricerca:abstract "In the EU, Directive 89/655/EEC, modified by Directive 95/63/EEC, lays down the minimum safety and health requirements for the use of work equipment by workers at work.\nArticle 1.1. (c) of 95/63/EEC establishes that \\\"...specific work equipment subject to the requirements of point 3 of Annex I, which, if already provided to workers in the undertaking and/or establishment by 5 December 1998, complies with the minimum requirements laid down in Annex I, no later than four years after that date.\\\"\nAnnex I specifies the following: point 3 \\\"Additional minimum requirements applicable to specific types of work equipment\\\" and point 3.1.4. \\\"Mobile work equipment with ride-on workers must be designed to restrict, under actual conditions of use, the risks arising from work equipment rollover:\n\neither by a protection structure to ensure that the equipment doesonot tilt by more than a quarter turn, or\na structure giving sufficient clearance around the ride-on workers if the tilting movement can continue beyond a quarter turn, or\nby some other device of equivalent effect.\nThese protection structures may be an integral part of the work equipment. They are not required when the work equipment is stabilised during operation or where the design makes roll over impossible. Where there is a risk of a ride-on worker being crushed between parts of the work equipment and the ground, should the equipment roll over, a restraining system for the ride-on worker must be installed.\nAs a consequence, some EU countries are making it compulsory for tractors sold before 5 December\n1998, to apply- in addition to the existing protective structure - a \\\"restraining member\\\" (normally a safety belt), without indicating the standards to be applied for the anchorages and safety belts."@en . @prefix ns10: . prodotto:ID253764 pubblicazioni:editore ns10:ID457 ; prodottidellaricerca:prodottoDi istituto:CDS049 ; pubblicazioni:autoreCNR unitaDiPersonaleInterno:MATRICOLA1947 . @prefix parolechiave: . prodotto:ID253764 parolechiave:insiemeDiParoleChiave . ns10:ID457 pubblicazioni:editoreDi prodotto:ID253764 . parolechiave:insiemeDiParoleChiaveDi prodotto:ID253764 .