@prefix prodottidellaricerca: . @prefix istituto: . @prefix prodotto: . istituto:CDS058 prodottidellaricerca:prodotto prodotto:ID235991 . @prefix pubblicazioni: . @prefix unitaDiPersonaleInterno: . unitaDiPersonaleInterno:MATRICOLA22207 pubblicazioni:autoreCNRDi prodotto:ID235991 . unitaDiPersonaleInterno:MATRICOLA5587 pubblicazioni:autoreCNRDi prodotto:ID235991 . @prefix modulo: . modulo:ID7268 prodottidellaricerca:prodotto prodotto:ID235991 . @prefix rdf: . @prefix retescientifica: . prodotto:ID235991 rdf:type retescientifica:ProdottoDellaRicerca , prodotto:TIPO1201 . @prefix rdfs: . prodotto:ID235991 rdfs:label "Combined heat and power generation from a stirling engine coupled with a fluidzed bed combustor (Contributo in volume (capitolo o saggio))"@en . @prefix xsd: . prodotto:ID235991 pubblicazioni:anno "2013-01-01T00:00:00+01:00"^^xsd:gYear . @prefix skos: . prodotto:ID235991 skos:altLabel "
S.Lombardi, K.Bizon, G.Continillo, F.S.Marra, B.M.Vaglieco (2013)
Combined heat and power generation from a stirling engine coupled with a fluidzed bed combustor
Doppiavoce, Napoli (Italia) in XXXVI Meeting of the Italian Section of the Combustion Institute, 2013
"^^rdf:HTML ; pubblicazioni:autori "S.Lombardi, K.Bizon, G.Continillo, F.S.Marra, B.M.Vaglieco"^^xsd:string ; pubblicazioni:titoloVolume "XXXVI Meeting of the Italian Section of the Combustion Institute"^^xsd:string ; pubblicazioni:affiliazioni "S.Lombardi- Dipartimento di Ingegneria-Universit\u00E0 del Sannio, Benevento, Italy\nK.Bizon - Dipartimento di Ingegneria -Universit\u00E0 del Sannio, Benevento, Italy\nG.Continillo - Dipartimento di Ingegneria -Universit\u00E0 del Sannio, Italy"^^xsd:string ; pubblicazioni:titolo "Combined heat and power generation from a stirling engine coupled with a fluidzed bed combustor"^^xsd:string ; pubblicazioni:isbn "978-88-88104-15-7"^^xsd:string ; pubblicazioni:curatoriVolume "A.Ciajolo, A.D'Anna, G.Nathan, F.Scala"^^xsd:string ; prodottidellaricerca:abstract "This work investigates the advantages of placing the hot side heat exchanger of a Stirling engine (SE) immersed in a Fluidized Bed Combustor (FBC). This choice is primarily suggested by the more efficient heat transfer between the multiphase fluidized bed medium and the heat exchanger, as compared with immersion in the flue gases. Moreover, the mechanical action of the solid particles reduces fouling, a typical problem of biomass combustion. In the model, the heat dissipated by the cooler of the SE and the exhaust gases heat are recovered to produce domestic hot water (DHW). A mathematical model, which couples the FBC and the SE, is\ndeveloped and used to optimize design and operating conditions, with specific attention to the SE hot side heat exchanger. It is shown that placing the heat exchanger in direct contact with the fluidized bed can lead to an improvement of performance in terms of fuel utilization efficiency (FUE) and shaft power output."@en . @prefix ns11: . prodotto:ID235991 pubblicazioni:editore ns11:ID217 ; prodottidellaricerca:prodottoDi istituto:CDS058 , modulo:ID7268 ; pubblicazioni:autoreCNR unitaDiPersonaleInterno:MATRICOLA5587 , unitaDiPersonaleInterno:MATRICOLA22207 . ns11:ID217 pubblicazioni:editoreDi prodotto:ID235991 .