@prefix prodottidellaricerca: . @prefix istituto: . @prefix prodotto: . istituto:CDS020 prodottidellaricerca:prodotto prodotto:ID195288 . @prefix modulo: . modulo:ID2549 prodottidellaricerca:prodotto prodotto:ID195288 . @prefix pubblicazioni: . @prefix unitaDiPersonaleInterno: . unitaDiPersonaleInterno:MATRICOLA14596 pubblicazioni:autoreCNRDi prodotto:ID195288 . @prefix rdf: . prodotto:ID195288 rdf:type prodotto:TIPO1301 . @prefix retescientifica: . prodotto:ID195288 rdf:type retescientifica:ProdottoDellaRicerca . @prefix rdfs: . prodotto:ID195288 rdfs:label "Acoustic characterization of automotive mufflers. Part I: test rig design and evaluation of acoustic properties (Contributo in atti di convegno)"@en . @prefix xsd: . prodotto:ID195288 pubblicazioni:anno "2012-01-01T00:00:00+01:00"^^xsd:gYear ; pubblicazioni:doi "10.4271/2012-01-0800"^^xsd:string . @prefix skos: . prodotto:ID195288 skos:altLabel "
Biliotti, Davide; Ferrara, Giovanni; Ferrari, Lorenzo; Lenzi, Giulio; Vichi, Giovanni (2012)
Acoustic characterization of automotive mufflers. Part I: test rig design and evaluation of acoustic properties
in SAE 2012 World Congress & Exhibition, Detroit, MI, USA, April 24, 2012
"^^rdf:HTML ; pubblicazioni:autori "Biliotti, Davide; Ferrara, Giovanni; Ferrari, Lorenzo; Lenzi, Giulio; Vichi, Giovanni"^^xsd:string ; pubblicazioni:affiliazioni "\\\"Sergio Stecco\\\" Department of Energy Engineering, University of Florence, Via S. Marta 3, 50139 Firenze, Italy;\nInstitute of Chemistry of Organometallic Compounds, National Council of Research of Italy (CNR-ICCOM), Via Madonna del Piano 10, 50019 Sesto Fiorentino (FI), Italy;"^^xsd:string ; pubblicazioni:titolo "Acoustic characterization of automotive mufflers. Part I: test rig design and evaluation of acoustic properties"^^xsd:string ; prodottidellaricerca:abstract "In current automotive research, increasing attention is being paid to the design of mufflers due to the lower noise levels which have been established by the acoustic international standards. The traditional design approaches are no longer sufficient to meet the standards and more refined techniques are necessary.\nWithin this context, a specific test rig was built at the Energy Engineering Department of the University of Florence to analyze the acoustic characteristics of both industrial mufflers and simplified models. In particular, the latter is commonly used to investigate in detail the physical phenomena connected to the acoustic response of these disposals and to calibrate numerical models. The test rig operates at ambient condition with no flow. Instead of the widely used Four Microphones Technique, the test rig was designed considering the Multi-Microphone Technique, which guarantees a wider reliable frequency range of analysis and lower errors in the evaluation of the acoustic properties of mufflers. In this paper the details of the criteria adopted in the design and the characterization of the test rig will be discussed in depth."@en ; prodottidellaricerca:prodottoDi modulo:ID2549 , istituto:CDS020 ; pubblicazioni:autoreCNR unitaDiPersonaleInterno:MATRICOLA14596 . @prefix parolechiave: . prodotto:ID195288 parolechiave:insiemeDiParoleChiave . parolechiave:insiemeDiParoleChiaveDi prodotto:ID195288 .