@prefix prodottidellaricerca: . @prefix istituto: . @prefix prodotto: . istituto:CDS051 prodottidellaricerca:prodotto prodotto:ID189904 . @prefix pubblicazioni: . @prefix unitaDiPersonaleInterno: . unitaDiPersonaleInterno:MATRICOLA14566 pubblicazioni:autoreCNRDi prodotto:ID189904 . @prefix rdf: . @prefix retescientifica: . prodotto:ID189904 rdf:type retescientifica:ProdottoDellaRicerca , prodotto:TIPO1101 . @prefix rdfs: . prodotto:ID189904 rdfs:label "Comparison of the physical properties of epoxy-based composites filled with different types of carbon nanotubes for aeronautic applications (Articolo in rivista)"@en . @prefix xsd: . prodotto:ID189904 pubblicazioni:anno "2012-01-01T00:00:00+01:00"^^xsd:gYear ; pubblicazioni:doi "10.1002/adv.21284"^^xsd:string . @prefix skos: . prodotto:ID189904 skos:altLabel "
De Vivo, B., Lamberti, P., Tucci, V., Guadagno, L., Vertuccio, L., Vittoria, V., Sorrentino, A. (2012)
Comparison of the physical properties of epoxy-based composites filled with different types of carbon nanotubes for aeronautic applications
in Advances in polymer technology (Print)
"^^rdf:HTML ; pubblicazioni:autori "De Vivo, B., Lamberti, P., Tucci, V., Guadagno, L., Vertuccio, L., Vittoria, V., Sorrentino, A."^^xsd:string ; pubblicazioni:paginaInizio "205"^^xsd:string ; pubblicazioni:paginaFine "218"^^xsd:string ; pubblicazioni:numeroVolume "31"^^xsd:string . @prefix ns10: . prodotto:ID189904 pubblicazioni:rivista ns10:ID436950 ; pubblicazioni:numeroFascicolo "3"^^xsd:string ; skos:note "ISI Web of Science (WOS)"^^xsd:string ; pubblicazioni:affiliazioni "Department of Electronic and Computer Engineering, University of Salerno, Via Ponte Don Melillo, 1-I84084 Fisciano (SA), Italy\nNANO MATES, Research Centre for NANOMAterials and Nanotechnology, Salerno University, Via Ponte Don Melillo, 1-I84084 Fisciano (SA), Italy\nDepartment of Industrial Engineering, University of Salerno, Via Ponte Don Melillo, 1-I84084 Fisciano (SA), Italy\nCNR, Institute for Composite and Biomedical Materials, Piazzale Enrico Fermi 1, I-80055 Portici (NA), Italy"^^xsd:string ; pubblicazioni:titolo "Comparison of the physical properties of epoxy-based composites filled with different types of carbon nanotubes for aeronautic applications"^^xsd:string ; prodottidellaricerca:abstract "The increased demand for high-quality multifunctional materials in the aeronautic industry requires the formulation and preparation of advanced nanostructured composites with superior characteristics. In particular, epoxy-based polymers, exhibiting excellent mechanical properties for structural stability, filled with carbon nanotubes (CNTs: single, double, and multiwalledSW, DW, and MW), characterized by remarkable mechanical and electrical properties, allow us to manufacture a very versatile class of composites for structural applications in automotive, aeronautics, industry, electronics, etc. Many aspects concerning the optimization of such composite systems are still to be clarified. In this paper, the physical properties of samples based on the epoxy resin with the same weight percentage (0.5%) of different CNTs have been studied. The physical behavior of the nanocomposites resulted to be dependent on the type and on the chemical functionalization of the nanoinclusions. The elastic modulus and the electrical conductivity of composites based on unfunctionalized CNT are higher than those obtained for the functionalized systems. Moreover, the maximum electrical conductivity achieved for the composite based on unfunctionalized MWCNT is not far from the target required for aeronautic applications. The contrasting results obtained for the different physical properties enlighten the difficulty in choosing one of the CNT types for the realization of multifunctional materials."@en ; prodottidellaricerca:prodottoDi istituto:CDS051 ; pubblicazioni:autoreCNR unitaDiPersonaleInterno:MATRICOLA14566 . ns10:ID436950 pubblicazioni:rivistaDi prodotto:ID189904 .