@prefix prodottidellaricerca: . @prefix istituto: . @prefix prodotto: . istituto:CDS035 prodottidellaricerca:prodotto prodotto:ID183811 . @prefix pubblicazioni: . @prefix unitaDiPersonaleInterno: . unitaDiPersonaleInterno:MATRICOLA11412 pubblicazioni:autoreCNRDi prodotto:ID183811 . @prefix modulo: . modulo:ID7889 prodottidellaricerca:prodotto prodotto:ID183811 . @prefix rdf: . prodotto:ID183811 rdf:type prodotto:TIPO1101 . @prefix retescientifica: . prodotto:ID183811 rdf:type retescientifica:ProdottoDellaRicerca . @prefix rdfs: . prodotto:ID183811 rdfs:label "Electroactive carbon nanotube actuators: Soft-lithographic fabrication and electro-chemical modelling (Articolo in rivista)"@en . @prefix xsd: . prodotto:ID183811 pubblicazioni:anno "2008-01-01T00:00:00+01:00"^^xsd:gYear ; pubblicazioni:doi "10.1016/j.msec.2007.04.032"^^xsd:string . @prefix skos: . prodotto:ID183811 skos:altLabel "
Mazzoldi A.; Tesconi M.; Tognetti A.; Rocchia W.; Vozzi G.; Pioggia G.; Ahluwalia A.; De Rossi, D. (2008)
Electroactive carbon nanotube actuators: Soft-lithographic fabrication and electro-chemical modelling
in Materials science & engineering. C, Biomimetic materials, sensors and systems (Print); Elsevier Sequoia, Lausanne (Svizzera)
"^^rdf:HTML ; pubblicazioni:autori "Mazzoldi A.; Tesconi M.; Tognetti A.; Rocchia W.; Vozzi G.; Pioggia G.; Ahluwalia A.; De Rossi, D."^^xsd:string ; pubblicazioni:paginaInizio "1057"^^xsd:string ; pubblicazioni:paginaFine "1064"^^xsd:string ; pubblicazioni:numeroVolume "28"^^xsd:string . @prefix ns11: . prodotto:ID183811 pubblicazioni:rivista ns11:ID238042 ; pubblicazioni:pagineTotali "8"^^xsd:string ; skos:note "Scopu"^^xsd:string ; pubblicazioni:affiliazioni "Interdepartmental Research Center \\\"E. Piaggio\\\", Faculty Of Engineering, University of Pisa, Pisa, Italy; NEST, IIT and Scuola Normale Superiore of Pisa, Piazza dei Cavalieri, 7, I-56126, Pisa, Italy"^^xsd:string ; pubblicazioni:titolo "Electroactive carbon nanotube actuators: Soft-lithographic fabrication and electro-chemical modelling"^^xsd:string ; prodottidellaricerca:abstract "Carbon nanotube (NT) actuators were fabricated using the micromolding method. In order to prevent the nanotubes from aggregating, they were enclosed in a partially cross-linked polyvinylalcohol-polyallylamine matrix. A unimorph matrix bender in the form of a small multi-layered strip, 5 mm \u00D7 15 mm was fabricated. The resulting composite system: NT/PVA, solid polymer electrolyte and metal contact, was characterised using impedance analysis and cyclic voltammetry. Initial measurements on electro-mechanical transduction show a conversion efficiency of 0.2 ?m/mV. An electrochemical model of the impedance of the system was then developed, with which the experimental results agree fairly well."@en . @prefix ns12: . prodotto:ID183811 pubblicazioni:editore ns12:ID12491 ; prodottidellaricerca:prodottoDi modulo:ID7889 , istituto:CDS035 ; pubblicazioni:autoreCNR unitaDiPersonaleInterno:MATRICOLA11412 . @prefix parolechiave: . prodotto:ID183811 parolechiave:insiemeDiParoleChiave . ns11:ID238042 pubblicazioni:rivistaDi prodotto:ID183811 . ns12:ID12491 pubblicazioni:editoreDi prodotto:ID183811 . parolechiave:insiemeDiParoleChiaveDi prodotto:ID183811 .