@prefix prodottidellaricerca: . @prefix istituto: . @prefix prodotto: . istituto:CDS033 prodottidellaricerca:prodotto prodotto:ID175406 . @prefix pubblicazioni: . @prefix unitaDiPersonaleInterno: . unitaDiPersonaleInterno:MATRICOLA1632 pubblicazioni:autoreCNRDi prodotto:ID175406 . unitaDiPersonaleInterno:MATRICOLA19904 pubblicazioni:autoreCNRDi prodotto:ID175406 . unitaDiPersonaleInterno:MATRICOLA10617 pubblicazioni:autoreCNRDi prodotto:ID175406 . unitaDiPersonaleInterno:MATRICOLA11532 pubblicazioni:autoreCNRDi prodotto:ID175406 . @prefix modulo: . modulo:ID2193 prodottidellaricerca:prodotto prodotto:ID175406 . unitaDiPersonaleInterno:MATRICOLA11641 pubblicazioni:autoreCNRDi prodotto:ID175406 . @prefix rdf: . prodotto:ID175406 rdf:type prodotto:TIPO1101 . @prefix retescientifica: . prodotto:ID175406 rdf:type retescientifica:ProdottoDellaRicerca . @prefix rdfs: . prodotto:ID175406 rdfs:label "The Planck-LFI flight model Ortho Mode Transducer (Articolo in rivista)"@en . @prefix xsd: . prodotto:ID175406 pubblicazioni:anno "2009-01-01T00:00:00+01:00"^^xsd:gYear ; pubblicazioni:doi "10.1088/1748-0221/4/12/T12005"^^xsd:string . @prefix skos: . prodotto:ID175406 skos:altLabel "
O. D'Arcangelo; A. Simonetto; L. Figini; E. Pagana; F. Villa; M. Pecora; P. Battaglia; M. Bersanelli; R. C. Butler; S. Garavaglia; P. Guzzi; N. Mandolesi; and C. Sozzi (2009)
The Planck-LFI flight model Ortho Mode Transducer
in Journal of instrumentation; IOP Publishing Ltd. (Institute of Physics Publishing Ltd), \"Bristol ; London\" (Regno Unito)
"^^rdf:HTML ; pubblicazioni:autori "O. D'Arcangelo; A. Simonetto; L. Figini; E. Pagana; F. Villa; M. Pecora; P. Battaglia; M. Bersanelli; R. C. Butler; S. Garavaglia; P. Guzzi; N. Mandolesi; and C. Sozzi"^^xsd:string ; pubblicazioni:url "http://iopscience.iop.org/1748-0221/4/12/T12005/"^^xsd:string ; pubblicazioni:numeroVolume "4"^^xsd:string . @prefix ns11: . prodotto:ID175406 pubblicazioni:rivista ns11:ID108546 ; pubblicazioni:pagineTotali "16"^^xsd:string ; pubblicazioni:numeroFascicolo "T12005"^^xsd:string ; skos:note "ISI Web of Science (WOS)"^^xsd:string ; pubblicazioni:affiliazioni "Istituto di Fisica del Plasma - CNR,\nvia Cozzi 53, 20125 Milano, Italy\nIndependant consultant\nIstituto di Astrofisica Spaziale e Fisica Cosmica, INAF,\nvia P. Gobetti 101, 40129 Bologna, Italy\nThales Alenia Space Italia,\nS.S. Padana Superiore 290, 20090 Vimodrone (MI), Italy\nUniversit\u00E1 degli Studi di Milano,\nVia Celoria 16, 20133 Milano, Italy"^^xsd:string ; pubblicazioni:titolo "The Planck-LFI flight model Ortho Mode Transducer"^^xsd:string ; prodottidellaricerca:abstract "The Low Frequency Instrument (LFI) of the ESA Planck CMB mission is an array of 22 ultra sensitive pseudocorrelation radiometers working at 30, 44, and 70 GHz. LFI has been calibrated and delivered for integration with the satellite to the European Space Agency on November 2006. The aim of Planck is to measure the anisotropy and polarization of the Cosmic Background Radiation with a sensitivity and angular resolution never reached before over the full sky. LFI is intrinsically sensitive to polarization thanks to the use of Ortho-Mode Transducers (OMT) located between the feedhorns and the pseudo-correlation radiometers. The OMTs are microwave passive components that divide the incoming radiation into two linear orthogonal components. A set of 11 OMTs (2 at 30 GHz, 3 at 44 GHz, and 6 at 70 GHz) were produced and tested. This work describes the design, development and performance of the eleven Flight Model OMTs of LFI. The final design was reached after several years of development. At first, Elegant Bread Board OMTs were produced to investigate the manufacturing technology and design requirements. Then, a set of 3 Qualification Model (QM) OMTs were designed, manufactured and tested in order to freeze the design and the manufacturing technology for the flight units. Finally, the Flight Models were produced and tested. It is shown that all the OMT units have been accepted for flight and the electromagnetic performance is at least marginally compliant with the requirements. Mechanically, the units passed all the thermoelastic qualification tests after a reworking necessary after the QM campaign."@en . @prefix ns12: . prodotto:ID175406 pubblicazioni:editore ns12:ID6105 ; prodottidellaricerca:prodottoDi modulo:ID2193 , istituto:CDS033 ; pubblicazioni:autoreCNR unitaDiPersonaleInterno:MATRICOLA11641 , unitaDiPersonaleInterno:MATRICOLA19904 , unitaDiPersonaleInterno:MATRICOLA10617 , unitaDiPersonaleInterno:MATRICOLA11532 , unitaDiPersonaleInterno:MATRICOLA1632 . ns12:ID6105 pubblicazioni:editoreDi prodotto:ID175406 . ns11:ID108546 pubblicazioni:rivistaDi prodotto:ID175406 .