@prefix prodottidellaricerca: . @prefix istituto: . @prefix prodotto: . istituto:CDS073 prodottidellaricerca:prodotto prodotto:ID175156 . @prefix pubblicazioni: . @prefix unitaDiPersonaleInterno: . unitaDiPersonaleInterno:MATRICOLA8974 pubblicazioni:autoreCNRDi prodotto:ID175156 . unitaDiPersonaleInterno:MATRICOLA2925 pubblicazioni:autoreCNRDi prodotto:ID175156 . @prefix modulo: . modulo:ID2440 prodottidellaricerca:prodotto prodotto:ID175156 . @prefix rdf: . @prefix retescientifica: . prodotto:ID175156 rdf:type retescientifica:ProdottoDellaRicerca , prodotto:TIPO1101 . @prefix rdfs: . prodotto:ID175156 rdfs:label "Oxidation behaviour of a pressureless sintered AlN-SiC composite (Articolo in rivista)"@en . @prefix xsd: . prodotto:ID175156 pubblicazioni:anno "2004-01-01T00:00:00+01:00"^^xsd:gYear ; pubblicazioni:doi "10.1023/B:JMSC.0000047539.40056.1a"^^xsd:string . @prefix skos: . prodotto:ID175156 skos:altLabel "
Diletta Sciti D; Fred Winterhalter ; Alida Bellosi (2004)
Oxidation behaviour of a pressureless sintered AlN-SiC composite
in Journal of materials science
"^^rdf:HTML ; pubblicazioni:autori "Diletta Sciti D; Fred Winterhalter ; Alida Bellosi"^^xsd:string ; pubblicazioni:paginaInizio "6965"^^xsd:string ; pubblicazioni:paginaFine "6973"^^xsd:string ; pubblicazioni:url "http://www.springerlink.com/content/jv561tpl14540w7h/"^^xsd:string ; pubblicazioni:numeroVolume "39"^^xsd:string . @prefix ns11: . prodotto:ID175156 pubblicazioni:rivista ns11:ID395020 ; pubblicazioni:pagineTotali "9"^^xsd:string ; pubblicazioni:numeroFascicolo "23"^^xsd:string ; skos:note "ISI Web of Science (WOS)"^^xsd:string ; pubblicazioni:affiliazioni "CNR-ISTEC, Institute of Science and Technology for Ceramics, Faenza, 48018, Italy"^^xsd:string ; pubblicazioni:titolo "Oxidation behaviour of a pressureless sintered AlN-SiC composite"^^xsd:string ; prodottidellaricerca:abstract "The present study aims to investigate the oxidation behaviour of an AlN-SiC composite, pressureless sintered with the addition of Y2O3. Two main aspects are considered: (1) the evaluation of the oxidation kinetics in the temperature range 1300-1450degreesC for short term tests (30 h) and (2) the degradation of the flexural strength after oxidation at temperatures from 1000 to 1400degreesC for 100 h, in relationship with the microstructure of the exposed surfaces.\nThe material starts to oxidize notably at temperatures higher than 1300degreesC. The oxidation kinetics is parabolic in the temperature range 1350-1450degreesC, the oxidation products are dependent on temperature and exposure time and are mainly constituted by crystalline mullite and alumina.\nThe surface modification induced by long term oxidation does not affect mechanical strength until 1200degreesC, while after oxidation at 1400degreesC, the residual strength is about 25% of the starting one. These results are discussed in terms of the microstructure modifications induced by oxidation."@en ; prodottidellaricerca:prodottoDi istituto:CDS073 , modulo:ID2440 ; pubblicazioni:autoreCNR unitaDiPersonaleInterno:MATRICOLA2925 , unitaDiPersonaleInterno:MATRICOLA8974 . ns11:ID395020 pubblicazioni:rivistaDi prodotto:ID175156 .